Close

Member Login

The program for 2017 consists of 10 units, four hours duration. Each unit is presented twice in a twelve month period, so you can choose either to attend on a Wednesday or Friday.

These units are aimed at site supervisors or people wishing to become site supervisors.  They are intended to expose attendees to technical information and by attending these sessions you will become generalists as opposed to specialists in any one topic.

Glazing & Fire Safety

Explores the Deemed-to-Satisfy requirements of Parts 3.6 and 3.7 of the Housing Provisions of the Building Code of Australia. This short course includes Glazing, Fire separation, Smoke alarms, Heating appliances, and Building in Bushfire prone areas. It reviews current WA provisions for Bushfire Attack Level Assessments and the requirements of AS 3959 - Construction of Buildings in Bushfire Prone Areas.

Safe Movement & Access

Explores the Deemed-to-Satisfy requirements of Part 3.9 of the Housing Provisions of the Building Code of Australia. This short course includes Stair construction, Balustrades and handrails, Swimming pool access and Swimming pool water recirculation systems. It explores the requirements for slip-resistance, protection of openable windows and the WA applicable requirements of AS 1926 - Swimming Pool Safety.

Finishing Trades (a)

Part A explores the Guide to Standards and Tolerances for Windows and doors, Internal fixing, Painting, Decks and Balconies, Timber floors and Paving. This short course also explores the requirements of AS/NZS 2311 – Guide to the Painting of Buildings.

Framing, Roof & Wall Cladding

Explores the Deemed-to-Satisfy requirements of Parts 3.4 and 3.5 of the Housing Provisions of the Building Code of Australia. This short course includes Framing, Sub-floor ventilation, Steel framing, Timber framing, Structural steel members, Roof cladding, Gutters and downpipes and Wall cladding. It also includes an overview of the requirements of AS 1684 – Residential Timber Framed Construction.

Health & Amenity

Explores the Deemed-to-Satisfy requirements of Part 3.8 of the Housing Provisions of the Building Code of Australia. This short course includes Wet areas and external weatherproofing, Room heights, Facilities, Light, Ventilation and Sound insulation. It also includes the requirements of AS 3740 – Waterproofing of Domestic Wet Areas.

Masonry

Explores the Deemed-to-Satisfy requirements of Part 3.3 of the Housing Provisions of the Building Code of Australia. This short course includes Unreinforced masonry, Reinforced masonry, Masonry accessories, Weatherproofing of masonry and Earthwall construction. It also includes an overview of the requirements of AS 4773 – Masonry for Small Buildings.

Finishing Trades (b)

Part B explores the Australian Standards Handbook HB161 Guide to Plastering detailing recommended minimum standards for plastering and rendering. This short course also explores the requirements of AS 3958 Part 1 - Guide to the Installation of Ceramic Tiles and AS/NZS 2589 – Gypsum Linings – Application and Finishing.

Residential Service Standards

Explores the requirements of AS/NZS 30007 Wiring Rules together with the requirements of the National Construction Code for residential electrical installations and energy efficiency provisions. It also explores the provisions of AS/NZS 3500 – Plumbing Code of Australia.

Site Preparations, Footings & Slabs

Explores the Deemed-to-Satisfy requirements of Parts 3.1 and 3.2 of the Housing Provisions of the Building Code of Australia. This short course includes Earthworks, Drainage, Termite risk management, Footings and slabs, Preparation, Concrete and reinforcing, Site classification, and Footing and slab construction. It also explores the provisions of AS 2870 – Residential Slabs and Footings.

Residential Energy Efficiency

Explores the Deemed-to-Satisfy requirements of Part 3.12 of the Housing Provisions of the Building Code of Australia. This course will also provide participants with an understanding of optional compliance pathways for residential buildings. It will explore the elemental provisions in detail, including Building Fabric, External Glazing, Building Sealing and Air Movement. It will also cover requirements for services, including hot water systems, heating and cooling ductwork, artificial lighting, pool and spa heaters and water use.

ON COMPLETION: Those who complete all 10 units within a twelve month period, will receive a Master Builders Codes & Standards Update - Residential Site Supervisors certificate.